SPECIFICATIONS FOR INDUSTRIAL SLA 3D LASER PRINTER
Solid Laser Vacuum Absorptive Scraper
Detachable Pallet Measurement of Laser Power on Line
Automatic Process Parameters
LASER SYSTEM | |
Laser Type | Nd: YV04 Solid Laser |
Wave Length | 355nm |
Power | Minimum Power to Liquid Level≥300mW |
RECOATING SYSTEM | |
Recoating Mode | Intelligent Position Vacuum Coating |
Normal Layered Thickness | 0.1mm |
Rapid Manufacturing Layered Thickness | 0.15mm |
Precise Manufacturing Layered Thickness | 0.05mm |
Special Manufacturing Layered Thickness | 0.05mm~0.20mm |
OPTICAL & SCANNING SYSTEM | |
Light Spot(diameter @1/e2) | 0.10-0.15mm |
Scanning Mode | Germanic Galvanometer Scanner |
Parts Maximum Scanning Speed | 10.0m/s |
ELEVATOR SYSTEM | |
Vertical Resolution Ratio | 0.0005mm |
Repeat Positioning Accuracy | ±0.01mm |
RESIN TANK | |
First Tank Weight | about 160kg |
Forming Material | Photosensitive Resin |
Construction Size | 350mm(X)×600mm(Y)×350mm(Z) |
Resin Heating Method | Bottom Heating with Silicone |
CONTROL SOFTWARE | |
Machine Control Software | K...3D Control Software |
Device Software Interface | 3D Design Software, STL File Format |
SOFTWARE SYSTEM | |
Master Controller Operation System | Windows 7 |
Network Type and Protocol | Ethernet，TCP/IP |
INSTALLATION CONDITION | |
Current Source | 200-240VAC 50/60Hz, Single Phase,10A |
Rated Dissipation | 1.5KVA |
Ambient Temperature | 20-26oC |
Relative Humidity | ＜40%，Frost Free Knot |
Apparatus Size(without display) | 108cm(W)×95cm(D)×198cm(H) |
Apparatus Weight | about 880kg |
SLA 3D printer put the unmatched capabilities of Stereolithography 3D printing technology, fine-tuned for cost-efficiency and unrivaled material availability, into a smaller footprint. 3D print with fine feature detail in a wide choice of performance engineered materials that match or exceed traditional plastic properties.
Integrated, reliable and proven
HD from 3D Systems gives you one point of contact to support your applications and daily use of our gold standard technology for additive manufacturing. Our SLA printers have high up time numbers. The broad spectrum of VisiJet SL materials is developed for 3D Systems SLA printers. Customized to our specific 3D print engine, VisiJet SL materials generate the consistency and mechanical properties required of each material.
Industry-leading 3D print preparation software
Access the industry-leading 3D Sprint software at no charge with each SLA 3D printer to enable rapid view, repair, enhancement and automated placement of parts in preparation for 3D printing. Your enhanced design for additive manufacturing workflow begins here.
Consistently accurate parts with finest features
Parts are accurate (+/-45 μm) throughout the entire build platform, print after print, machine after machine. Features are reproducible down to 0.050mm or 0.002 in – depending on geometry, orientation and build mode. Only 3D Systems Stereolithography 3D printers meet or exceed standard tolerances for injection-molded plastics.
in 3d SLA đế giầy
In 3d SLA vỏ máy mỏng lớn
In 3d SLA mặt lạ
In 3D SLA công nghiệp oto
in 3d sla chi tiết công nghiệp
in 3d SLA y tế
in 3d sla kiến trúc
In 3d SLA đồ chơi
